LEIHONG / HEAVY INDUSTRIAL LOAD REVIEW

Heavy Industrial FRP Grating Load Capacity & Heavy-Duty Flooring Solutions

Evaluate heavy duty fiberglass grating for concentrated loads, equipment access and vehicle crossings. Match the exact construction, clear span, support arrangement, operating temperature and load case before specifying industrial load bearing grating.

UDL / point / wheel-load reviewMolded & pultruded inquiriesProduct-specific test evidenceCustom support coordination

Hebei Leihong FRP Technology Co., Ltd. · Factory-direct project inquiry · No universal forklift or H-20 rating inferred

Span & Deflection-Limit Helper

Calculate a specified L/n limit. This tool does not calculate the grating's actual deflection or safe load.

Enter a span to calculate the selected limit.

Use the criterion required by the project. These ratios are examples, not default industrial approvals.

01 / Engineering load parameters

Heavy-Duty Engineering Load Ratings & Criteria

Separate load cases before selecting panel depth. Distributed loads, point loads and wheel loads cannot be converted into each other without an appropriate structural model.

kN/m²

Uniform Distributed Load

Review loaded area, span, support direction, long-term loading and allowable deflection.

View Calculation Notes

For a truly uniform load, total applied load = pressure × loaded area. This arithmetic does not establish panel capacity.

kN

Concentrated Point Load

Provide the equipment-foot or load-pad dimensions, position and proximity to cutouts. Check local effects and the supporting structure.

View Calculation Notes

Identify force and contact dimensions. Contact pressure alone is not a grating strength check.

kN / wheel

Rolling Wheel Load

Provide loaded vehicle wheel reactions, tire contact area, spacing, turning, braking, impact and traffic frequency.

View Calculation Notes

Use verified vehicle or engineer-provided wheel reactions. Gross vehicle mass divided by wheel count is not a reliable design assumption.

mm

Deflection & Serviceability

Agree the specified span ratio, absolute limit and long-term criteria, then compare with exact product data.

View Calculation Notes

A limit expressed as L/n gives permissible deflection = clear span ÷ n. Actual panel deflection needs verified stiffness and load data.

02 / Load & span documentation

Heavy Industrial FRP Grating Load & Deflection Specifications

Filter the construction and nominal depth to prepare a data request. Catalog page 6 provides deflection readings under stated loads. Select a listed molded configuration below; values are catalog references, not allowable-load ratings.

Molded heavy-duty · 38 mm

DepthMesh pitchTop / bottom barCatalog panel sizesOpen areaWeight
38 mm38.1 × 38.1 mm7.0 / 5.0 mm1226 × 3666; 1530 × 3969 mm68%19.5 kg/m²
50 mm50.8 × 50.8 mm8.0 / 5.0 mm1226 × 3666; 1226 × 3055 mm78%23.5 kg/m²
60 mm38.1 × 38.1 mm11.5 / 9.0 mm1220 × 3660 mm54%50.4 kg/m²
60 mm60 × 60 mm10.0 / 6.0 mm1510 × 2410 mm68%25.0 kg/m²

Source: Leihong FRP gratings and pultruded parts catalogue-LH, PDF page 4. These rows reproduce that table's variants. Other catalog pages list different nominal sizes and weights; confirm the selected tooling and order drawing rather than combining values across variants.

Catalog Load–Deflection Readings

Each number below is measured deflection in millimeters at the stated applied load.

Source: supplied catalog, PDF page 6, “Gratings Plate Load Table.” “—” means no value is listed; it does not mean zero deflection or approval. Mesh designations on the load page are 38.1 × 38.1 × 38 mm and 50.8 × 50.8 × 50 mm. Verify that the ordered construction matches before using these data.

Read the load categories correctly.

The source separates line load (kg/m), uniform load (kg/m²) and whole-plate load (kg). This page transcribes line and uniform loads only. Whole-plate load is not relabeled as a point or wheel load. SI headings use kg × 9.80665 / 1000 as force-equivalent conversion; original catalog units are retained alongside.

The catalog load page does not state the test method, resin, temperature, bearing detail, failure load or safety factor. It therefore does not establish safe working loads, a 4:1 design basis, 25°C test conditions, fatigue performance or vehicle approval. Obtain the required verification for the project.

Request Product-Matched Load Verification
Pultruded fiberglass grating construction reference for directional load review

Product reference, not test evidence for a specific heavy-duty load case.

03 / Structural architecture

Review Reinforcement, Resin & Load-Bar Geometry

Molded versus pultruded load paths

Molded panels have reinforcing paths in two directions; pultruded panels have a primary bearing-bar direction. Confirm the exact geometry and support arrangement rather than selecting on the process name alone.

Resin and service conditions

Review vinyl ester or isophthalic formulations against chemical exposure and temperature. Creep, aging and fatigue can affect performance; no zero-strength-loss assumption is made.

Bar and connection design

Depth, wall thickness, bar spacing, reinforcement, cross-rods and connections influence behavior. Higher glass content or a higher resin-to-glass ratio alone does not prove greater capacity.

Send the Proposed Loading & Exposure

04 / Heavy industrial applications

Engineering Review for Critical Heavy-Load Facilities

Use the application to define the loads, operating conditions and support design. Images are grating references, not verified heavy-vehicle installations.

FRP grating panel or access walkway reference
WHEEL LOADS / TURNING / IMPACT

Forklift Ramps & Loading Bays

Supply loaded wheel reactions, tire type, contact areas, incline, braking and traffic frequency. Obtain explicit approval for the exact panel and framing.

FRP grating panel or access walkway reference
POINT LOADS / VIBRATION

Mining & Smelting Access

Separate personnel access from equipment supports, pipe reactions and motor vibration. Include abrasion, heat and chemical exposure.

FRP grating panel or access walkway reference
ENVIRONMENT / DYNAMIC EFFECTS

Offshore & Petrochemical Decks

Coordinate deck loads, support direction, corrosion, fire requirements, uplift and applicable marine or plant criteria.

FRP grating panel or access walkway reference
PANEL / SEAT / FRAME ASSEMBLY

Vehicle-Crossing Trench Covers

Verify the cover, embed angles, anchors, concrete and underlying structure together. Added intermediate supports may be part of the design.

05 / Material comparison

Heavy Industrial FRP vs. Heavy-Duty Steel Grating

Compare equal performance requirements, not equal thickness alone. Structural stiffness, fire behavior, temperature and long-term service all matter.

FactorHeavy-duty FRP proposalHeavy-duty steel proposal
Capacity and stiffnessVerify exact geometry, reinforcement and supportsVerify steel section, connections and supports
Handling weightOften lighter; compare actual selected panelCompare actual selected panel and lifting plan
Chemical exposureResin and environment dependentAlloy / coating and environment dependent
Impact and overloadMay damage or fail; inspect after eventsMay yield or fail; inspect after events
Long-term loadingReview creep, fatigue and environmentReview fatigue, corrosion and connections
InstallationPlan cutting, dust controls, sealing and fixingsPlan cutting, coating repair and fixings
MaintenanceCleaning, inspection and replacement planningCleaning, coating / corrosion and replacement planning
Compare total ownership cost over an agreed service period.

TCO = purchase + transport + supports and installation + inspection and cleaning + repairs and replacements + downtime and disposal. Include timing and discounting where relevant; no fixed 40% saving or 20-year service life is assumed.

06 / Engineering FAQ

Frequently Asked Questions on Heavy-Duty Load Capacity

How should axle loads be converted for a vehicle crossing?

Use verified loaded wheel reactions and contact patches from the vehicle data or project engineer. Axle balance, payload location, wheel arrangement, turning and braking affect load distribution. Apply dynamic and design factors required by the project standard; do not use a universal axle-load reduction or divide gross mass equally among wheels.

How can I control stiffness over a span greater than one meter?

Review a suitable directional pultruded configuration, deeper section or closer supports using exact product data. Check deflection, creep, local loads, bearing and fixings. A span above one meter is not automatically acceptable or unacceptable based on construction name alone.

Does cutting a pipe opening reduce heavy-duty grating capacity?

It can interrupt bearing bars and reinforcement and alter load distribution. Review trimming supports, opening frames and fixing positions before cutting. Edge sealing protects exposed fibers but does not restore severed structural capacity.

Should I use molded or pultruded grating for heavy industrial loads?

Compare the exact proposed configurations against the support layout, load direction, local loads, deflection and environment. Molded panels offer two-direction reinforcement paths; pultruded panels have a primary bearing-bar direction. Neither process is universally the heavier-duty choice.

Does an H-20 statement guarantee forklift suitability?

No. The applicable assessment must match the load model, assembly, installation and design standard. Forklift wheel contact, turning and dynamic conditions can differ from a specified vehicle load model. Obtain approval for the actual vehicle and panel/frame design.

Can I request a structural calculation or finite-element analysis?

Send the load cases, support layout, geometry, exposure and acceptance criteria. Leihong can confirm available technical review, test evidence and any calculation or analysis scope, cost and deliverables. A free FEA service is not assumed.

07 / Technical RFQ

Request an Engineering Load Review & Project Quote

Send your clear span, load cases and site conditions to Hebei Leihong FRP Technology Co., Ltd. Discuss the proposed panel, supports, test evidence, custom fabrication and factory pricing.

  • Clear spans, supports, bearing and panel direction
  • UDL, point or wheel loads and contact dimensions
  • Temperature, chemical exposure and design criteria
  • Quantity, drawings and delivery destination
Product-specific evidenceDrawing-based reviewSample options on request

sales@leihongfiberglass.com
WhatsApp: +86 18831837530

Confirm technical service scope, sample terms, document availability and response timing with your inquiry. Request an NDA before providing restricted project drawings if required.

Prepare Your Engineering Requirements

1 / Load inputs2 / Project & submission

Open the Contact Form →