LEIHONG / TRENCH & DRAINAGE COVERS

Industrial FRP Drain Cover Grating — Factory-Direct Panels & Custom Fabrication

Specify fiberglass trench drain grates for chemical facilities, wash bays, food-processing access and public drainage routes. Match the FRP water gutter cover to the clear span, traffic, chemical exposure and required water flow.

Corrosion-resistant resin optionsOpen mesh or covered constructionSurface & fixing selectionProject-specific load review
View Load Selection Guide

Hebei Leihong FRP Technology Co., Ltd. · Standard panel inquiries · Drawing-based trench cover fabrication

Molded FRP grating reference for cut-to-size drainage covers
Clear spanSupport, bearing and fixings require design review
Drainage geometryConfirm clear openings and flow requirements
Load & support reviewSpan, wheel loads, bearing and fixing plan
Custom fabricationPanel sizes, cutouts and sealed edges
Product documentationAgree tests and inspection requirements

01 / Drainage performance

Engineering Advantages for Demanding Drainage Routes

Review the cover, trench, supports and maintenance as one drainage system.

Open-Mesh Water Entry

Select open area and actual clear openings for the water inflow and solids. Debris, baskets, trench slope and downstream capacity also affect drainage.

Chemical-Resistant Options

Match resin to chemical identity, concentration and temperature. FRP does not undergo steel rusting, but incompatible media can still damage it.

Engineered Structural Support

Molded and pultruded constructions have different load paths. Vehicle service requires explicit wheel-load verification; it is not established by depth alone.

Wet-Route Surface Selection

Compare concave and grit finishes using relevant slip data. Clean deposits and inspect wear; no surface remains permanently slip-proof.

Open area is configuration-specific.

A 60–70% opening ratio can be a specification to discuss for a selected square mesh, but does not apply to every mini-mesh, covered or custom panel. Confirm dimensions and drainage performance for the proposed product.

02 / Specifications & loading

FRP Drain Cover Sizes & Load Selection Guide

Use traffic type to define the engineering questions. The table is an inquiry checklist, not an approved span or load-rating chart.

Pedestrian routes: provide clear span, design foot traffic, point load, opening limits and acceptable deflection.
Nominal depthMesh pitch inquiry optionsTrench width / clear spanDesign & ultimate loadPanel weight
25 mm38 × 38 mm;
19 × 19 mm small mesh subject to tooling
Provide actual span.
200–1000 mm may be reviewed; not an approved range.
Product-specific test / design data requiredConfirm exact mesh, resin and finish
30 mm38 × 38 mm;
19 × 19 mm small mesh subject to tooling
Provide actual span.
200–1000 mm may be reviewed; not an approved range.
Product-specific test / design data requiredConfirm exact mesh, resin and finish
38 mm · common inquiry depth38 × 38 mm;
19 × 19 mm small mesh subject to tooling
Provide actual span.
200–1000 mm may be reviewed; not an approved range.
Product-specific test / design data requiredConfirm exact mesh, resin and finish
50 mm38 × 38 mm;
19 × 19 mm small mesh subject to tooling
Provide actual span.
200–1000 mm may be reviewed; not an approved range.
Product-specific test / design data requiredConfirm exact mesh, resin and finish

Mesh pitch is center-to-center distance, not the clear aperture. Mini mesh does not automatically meet heel-safe or accessibility requirements. Confirm exact openings and local requirements.

Define Loading Precisely

Supply wheel loads, contact patch, axle and wheel spacing, travel direction, impact effects and frequency. Specify support direction, bearing, fixings and permissible deflection.

Need a D400-Class Assembly?

State the applicable standard, classification and installed location. Request evidence for the exact grating-and-frame assembly. A D400 test designation is not a direct vehicle-mass rating and cannot be assigned from thickness alone.

03 / Structure & surface

Choose the Drain Cover Structure for Your Trench

Open mesh accepts water through the panel. Covered panels require a separate drainage and sealing strategy.

Fiberglass grating construction reference
WASH BAYS / PROCESS DRAINS

Open Mesh Grating

Square mesh with a concave or specified grit finish. Review water inflow, solids, slip conditions and removal access.

Fiberglass grating construction reference
PUBLIC ROUTES / SMALL OPENINGS

Mini-Mesh Drain Grating

Smaller top openings can reduce the passage of some small objects. Confirm the actual aperture, wheel contact and accessibility requirements.

Fiberglass grating construction reference
SERVICE TRENCHES / ENCLOSURES

Solid Top / Covered Grating

A composite cover provides a closed walking face. Review total depth, support and bond. Odor, gas or liquid containment needs engineered joints, seals and ventilation.

04 / Material comparison

Compare FRP, Cast Iron, Steel & Concrete Drain Covers

Select against the same load class, support arrangement, exposure and inspection requirements. Each material has suitable applications.

Decision factorFRP cover / gratingDuctile cast ironGalvanized steelPrecast concrete
Chemical exposureResin and temperature dependentAlloy, coating and medium dependentCoating condition and medium dependentMix, protection and exposure dependent
Traffic loadingExact panel and frame verificationRated assembly and installationSection and support designReinforcement and support design
HandlingOften lighter; verify panel weightLifting needs vary by unitPanel weight variesLifting equipment often needed
Theft / movementLow scrap value; secure fixing still requiredLocking or restraint optionsSecure fixing requiredRestraint and lifting details
Wet tractionFinish and contamination-specific testPattern and contamination-specific testSerration and contamination-specific testTexture and contamination-specific test
Lifecycle upkeepCleaning, inspection and replacement planningInspect corrosion, seating and frameInspect coating, corrosion and supportsInspect cracks, edges and bearing
Compare total installed cost using your site figures.

Include purchase, transport, supports, lifting, fixings, cleaning, inspection and replacement over an agreed service period. No universal 20-year lifespan, zero-theft risk or three-year cost advantage is assumed.

Request a Material Replacement Proposal →

05 / Drainage applications

Specify a Configuration for Your Industry

These examples explain selection needs. Product images are references rather than named installation case studies.

FRP panel or walkway reference for drainage selection

Car Wash & Auto Detailing

Review mud and sand, detergent compatibility, wet traction, small trolley wheels and any vehicle crossings. A 38mm mini-mesh panel needs its own load review.

FRP panel or walkway reference for drainage selection

Chemical & Wastewater Plants

Review the actual chemicals, concentrations, temperature and exposure. Vinyl ester can be evaluated where suitable; open mesh does not contain vapors.

FRP panel or walkway reference for drainage selection

Food Processing Drainage

Confirm cleaning agents, wash pressure and temperature, hygiene access and opening geometry. FRP is not automatically antibacterial or food-contact certified.

FRP panel or walkway reference for drainage selection

Municipal & Public Walkways

Confirm actual clear openings, accessible-route criteria, design traffic and runoff. Coordinate colors, removable panels and safe transitions with the site design.

FRP grating panels for fabrication review

Grating product reference · Confirm available fabrication and accessory options with the quote.

06 / Custom fabrication

Cut-to-Size Covers & Coordinated Trench Supports

  • Shaped cutting: review curves, pipe clearances, access openings and panel marks against drawings.
  • Edge treatment: specify compatible resin sealing for exposed reinforcement.
  • Support options: discuss FRP curb angles or other frames, anchors and adequate bearing.
  • Fixings: review suitable M- or C-type clips and 304 / 316 stainless steel options.
  • Color & fire: confirm color targets and required ASTM E84 evidence for the proposed product.
Send a Trench Drawing for Review
01 / ReviewConfirm dimensions, supports and traffic.
02 / ApproveAgree panel layout, tolerances and inspection.
03 / FabricateCut, finish, seal and label as specified.
04 / DeliverConfirm packing, fixing kit and installation guidance.

07 / Engineering FAQ

FRP Drain Cover Grating: Procurement & Installation Questions

What thickness is suitable for a forklift or fire-engine crossing?

Vehicle mass alone is insufficient. Supply wheel loads, wheel spacing, contact area, impact effects, clear span, bearing and the required design standard. Verify the exact panel-and-frame arrangement. Neither a 38mm or 50mm depth nor a span below 400mm automatically establishes a vehicle rating.

How much bearing should I allow on each trench edge?

Required bearing depends on the panel, supports, design load, tolerances and fixing arrangement. Confirm it on the approved product drawing. Do not use grating depth or a generic 40–50mm recommendation as a substitute for the specified bearing.

Will an outdoor FRP drain grate resist UV aging?

Specify outdoor exposure and request the proposed UV protection and relevant evidence. Resin, surface protection, climate and maintenance affect weathering. Inspect for fiber exposure, surface wear and cracking; no outdoor FRP is universally immune to aging.

Can heavy rain, flooding or traffic lift or move the cover?

Uplift, hydraulic effects, traffic and vibration must be considered in the fixing design. Select suitable clips, anchors and frames and provide access for inspection. Lightweight covers still require secure restraint; fastening does not eliminate the need for maintenance.

Does a solid top FRP cover provide drainage and odor sealing?

A solid top does not drain through like open mesh. Plan runoff or separate inlets. Odor or liquid containment requires an engineered cover system, including joints, seals, penetrations and any ventilation requirements.

How do I request a quote for custom FRP drain covers?

Provide clear trench width, total length, panel layout, supports, traffic or wheel loads, exposure and delivery destination. Include drawings or photos where available. Sample terms, documentation and delivery timing are confirmed with the quotation.

08 / Factory-direct quotation

Request Your FRP Drain Cover Layout & Factory Quote

Send your trench dimensions, traffic loads and quantity to Hebei Leihong FRP Technology Co., Ltd. Discuss standard panels, custom fabrication, support options and relevant engineering documentation.

  • Clear trench width / span and total length
  • Pedestrian use or wheel-load details
  • Resin exposure, mesh and surface preference
  • Delivery location and required project date
Custom sizes reviewedSample options on requestDrawing-based coordination

WhatsApp: +86 18831837530
sales@leihongfiberglass.com
Call Our Team →

Sample charges or freight, stock availability, response timing, dispatch and warranty terms are confirmed with the quotation.

Send Your Trench Requirements

Include span, load type and total length or area in your message.

Please enable JavaScript in your browser to complete this form.
Name
Have drawings or site photos?

Send your files by email with your project name and dimensions.

Email Drawings & Requirements →
Open the Contact Page →

Prepare Your Drain Cover Inquiry

FRP drain cover quotation

This prepares your details. Complete and submit the form below to send the inquiry. Email drawings separately.