LEIHONG / INDUSTRIAL SURFACE SELECTION
Anti-Slip Options for FRP Grating: Engineered for Maximum Traction and Safety
Compare concave, gritted and covered fiberglass grating for wet, oily and corrosive industrial environments. Match surface texture, drainage and resin selection to the way your facility works.
Hebei Leihong FRP Technology Co., Ltd. · Factory-direct fiberglass grating · Project-specific selection

Concave and gritted pattern schematics · Product texture varies by specification.
01 / Surface options
Comprehensive Anti-Slip Surface Treatments for FRP Grating
Choose a surface below to add it to your sample or quotation inquiry. Final construction and manufacturing process are confirmed with the proposed product.
Concave / Meniscus
A curved profile forms on the top of molded grating bars. The edges provide traction without added grit, while open mesh allows liquid to drain.
Consider for maintenance walkways and general wet access. Cleaning is still required; do not assume barefoot suitability.
Gritted Open Mesh
Abrasive particles are bonded into the resin at the walking surface. Ask whether the proposed finish is integrally applied or a secondary bonded treatment.
A first option to evaluate for oily industrial access, chemical areas and marine walkways, with testing under relevant conditions.
Gritted Solid Cover
A grit-finished FRP cover is combined with a supporting grating panel. Confirm the cover bond, total depth, deflection and fixing arrangement.
Consider where dropped small items are a concern. A solid top needs drainage planning; odor or liquid sealing requires engineered joints.
Chequered Cover
A raised diamond or similar molded pattern provides a textured walking face. The cover and support arrangement must suit the project load.
Consider for service routes and trolley access after reviewing wet traction, wheel contact area, cleaning and accessibility.
Surface diagrams explain patterns; they do not certify grit retention, friction values or manufacturing technique. Leihong can review the requested finish, resin and inspection requirements with your inquiry.
02 / Engineering comparison
Anti-Slip Performance Comparison & Testing Standards
Use this matrix to narrow the selection. Numerical ratings must come from a report covering the exact surface, test method and conditions.
| Selection factor | Concave | Gritted open mesh | Gritted solid cover | Chequered cover |
|---|---|---|---|---|
| Walking face | Molded bar edges | Bonded abrasive grit | Abrasive grit on cover | Raised molded pattern |
| R rating / wet & dry COF | Test report required | Test report required | Test report required | Test report required |
| Abrasion & service life | Inspect edge wear | Inspect grit and bond wear | Inspect grit, cover and bond | Inspect raised pattern wear |
| Footwear | Assess work footwear | Work boots; abrasive texture | Work boots; abrasive texture | Assess boots and trolley route |
| Barefoot use | Separate suitability review | Generally abrasive; review separately | Generally abrasive; review separately | Separate suitability review |
| Drainage | Through open mesh | Through open mesh | Surface drainage needed | Surface drainage needed |
| Cleaning | Remove debris and deposits | Brush texture; remove oil and sludge | Clean texture and manage runoff | Clean recesses and manage runoff |
| Wheel loads | Engineer mesh and panel | Engineer mesh and panel | Engineer cover and support | Engineer cover and support |
DIN / EN requirements
State the specified method, edition and target R classification. An R13 label must be supported by a matching report; it is not assigned by texture alone.
Pendulum testing
Discuss the specified method, slider, wet condition and contaminant. HSE guidance uses pendulum testing to help assess floor slipperiness.
Product traceability
Request relevant material, inspection and test documents for the proposed specification. Confirm report scope and batch or product identification.
ASTM C1028 was a static-friction method and has been withdrawn. It does not supply a dynamic-friction rating. Results from different methods cannot be treated as interchangeable, and one dry COF value does not establish safe performance on an oily site.
Discuss Your Test Requirements →Technical references: ASTM standards listing · HSE slip-resistance guidance. References explain testing; they are not Leihong product certificates.
Leihong · sales@leihongfiberglass.com · +86 18831837530. Selection guide only; product-specific testing and structural verification required.
03 / Industrial applications
Tailored Anti-Slip Solutions for Harsh Industrial Environments
Start with the contaminant, footwear, slope and cleaning regime. Then select the surface and resin together.

Marine & Petrochemical Platforms
For oily work-boot routes, evaluate a coarse gritted finish and a resin suited to the actual chemical exposure. Vinyl ester and silicon-carbide grit can be discussed where appropriate.

Wastewater Treatment & Food Processing
Compare concave and medium-grit open mesh for wet industrial access. Review the cleaning chemicals and process fluids before selecting isophthalic or vinyl ester resin.

Wash Bays & Commercial Ramps
Evaluate gritted small mesh or a textured cover for the route, footwear and wheel geometry. On a ramp, surface selection must include slope and drainage.
Images are product and walkway references. Named project case studies can be supplied when their details and documentation are confirmed.
04 / Factory customization
Custom Grit Sizes, Resin Matrices & Color Specifications
Send a drawing and exposure description to Leihong for a coordinated surface, panel and fabrication proposal.
Grit Material & Grading
Discuss fine, medium or coarse texture, quartz or silicon carbide, and the application method.
Request particle grading, a physical sample and bond or wear evidence where required.
Resin & Fire Requirements
Review orthophthalic, isophthalic and vinyl ester formulations against the actual medium, concentration and temperature.
Specify required fire test methods separately; resin family does not establish fire or slip compliance.
Safety Colors & Pre-Cutting
Specify safety yellow, industrial gray, green or a requested RAL color, plus panel marks, openings and cutouts.
Agree edge sealing, bearing details and clips before fabrication to help reduce work on site.
05 / Technical FAQ
Frequently Asked Questions About Anti-Slip FRP Grating
Will grit come loose from FRP grating?
Retention depends on the grit, resin bond, application process, curing and wear conditions. Ask Leihong to confirm the proposed process and inspect a representative sample. No surface is wear-proof; inspect traffic areas and replace or repair worn panels according to product guidance.
How do I choose concave vs gritted FRP grating?
Concave grating is an option for general access where drainage and cleaning are priorities. Gritted FRP grating is a strong candidate for more demanding wet or oily work-boot routes. Select using the actual contaminant, slope and footwear, with relevant slip testing; neither finish is automatically safe for barefoot use.
How do I clean gritted FRP grating?
Remove solids, brush the texture and use a cleaning agent compatible with the resin and contaminant. Rinse and restore drainage. Confirm permitted water pressure, nozzle distance and temperature with the supplier; excessive pressure or aggressive chemicals may damage the surface or bond.
Does site cutting affect slip resistance or corrosion protection?
Cutting may expose reinforcement and disturb the surface near an edge. Use the specified tools, dust controls and protective equipment, then seal exposed edges with compatible resin. Check bearing, openings and clip locations; sealing does not restore an interrupted structural load path.
Can I use anti-slip grating for forklifts or trolleys?
A traction finish does not establish wheel-load capacity. Provide wheel loads, contact area, wheel spacing, travel direction, dynamic effects and clear span. Forklift service requires a specifically engineered panel and support arrangement.
Can I request an R13 rating or a free sample kit?
Include the required test method and classification, plus the requested finish and destination. Leihong will confirm the available product evidence, sample availability, any sample or freight charges and dispatch timing before you order.
06 / Samples & project quotation
Secure Your Facility with Leihong Anti-Slip FRP Grating Solutions
Tell Hebei Leihong FRP Technology Co., Ltd. about your new platform, walkway upgrade or drainage project. We can review surface options, material requirements and the information needed for a factory quotation.
- Compare proposed finishes with sample options
- Discuss custom cutting and panel schedules
- Agree inspection and document requirements
- Confirm production timing and export packing
For a useful recommendation, include contaminants, footwear, slope, span, load and cleaning conditions.
sales@leihongfiberglass.com
WhatsApp: +86 18831837530
Sample terms, freight, report availability and response or dispatch timing are confirmed with your inquiry.
Request Pricing & Surface Samples
Choose a finish or ask for selection support. This form prepares an email in your email application.
Prefer the website form? Contact Leihong →