LEIHONG / 38 MM INDUSTRIAL GRATING
Industrial-Grade 1 1/2" FRP Grating – High Strength & Superior Corrosion Resistance
Source 1.5 inch fiberglass grating for industrial walkways, chemical platforms and drainage covers. Specify molded or pultruded construction, resin, surface finish and cut-to-size panels for your project.
Hebei Leihong FRP Technology Co., Ltd. · Factory-direct supply · Standard panels & custom fabrication
01 / Specifications
Standard Specifications for 1-1/2" Deep FRP Grating
Start with the molded panel configuration below. Pultruded grating has a different load-bar layout and requires its own dimensions and load table.
| Parameter | Reference specification | Selection notes |
|---|---|---|
| Grating depth | 1 1/2" (38.1 mm); nominal 38 mm | Confirm actual thickness and tolerance on the order. |
| Molded mesh pitch | 38 × 38 mm square; 19 × 19 mm small-mesh inquiry option | Pitch is center-to-center spacing, not the clear opening. |
| Reference bar width | Top approx. 6.5 mm / bottom approx. 5 mm | Tooling-dependent; obtain the cross-section drawing. |
| Open area | Approx. 68–70% for the relevant standard square mesh | Does not apply automatically to 19 mm small mesh or pultruded panels. |
| Panel size | 915 × 3050 mm (3′ × 10′ nominal) | Nominal imperial equivalents; confirm tooling and availability. |
| Reference panel weight | Approx. 19.5 kg/m² (4.0 lb/ft²) | Indicative for a selected molded configuration; mesh, resin and grit change weight. |
| Resin / color | Isophthalic or vinyl ester; yellow, green, gray or requested RAL | Confirm formulation, color match and production quantity. |
| Fixings | M-, C- and L-type clips; 316 stainless steel on request | Select clip geometry, quantity and grade for the support and exposure. |
Reference inquiry data supplied for selection, not a certified product datasheet or stock list. Final dimensions, weight, open area and tolerances must match the approved quotation.
Request documentation for the exact mesh, resin, construction, loading direction and span. The printable summary contains selection parameters; it does not certify load capacity.
Request Spec Sheet & Verified Load Table →Leihong · sales@leihongfiberglass.com · +86 18831837530. Load capacity is subject to product-specific data and engineering review.
02 / Material selection
Resin Formulations & Surface Finishes for 1.5" Grating
Choose the resin for the exposure and the surface for the walking conditions. These are two separate choices that work together.

Isophthalic resin
A cost-conscious starting point for wastewater access and general industrial walkways, subject to chemical compatibility.
Review: medium, concentration & temperature
Vinyl ester resin
Consider for more demanding chemical environments, including plating and process areas. Compatibility depends on the exact formulation.
Review: chemical resistance data
Gritted surface
Bonded abrasive grit provides a textured finish for wet or contaminated walkways. Specify grit type, bonding and cleaning requirements.
Traction: application-specific testing
Meniscus surface
The concave molded top provides a traction option for general access areas. Review footwear, contamination and housekeeping needs.
Traction: match to actual conditionsImages show grating product references; they are not resin identification or finish test evidence. Ask Leihong to confirm resin formulation, reinforcement, curing and required inspection documents.
03 / Engineering review
Engineering Load & Deflection Performance (1-1/2" Depth)
38mm FRP grating is a common depth to evaluate for industrial pedestrian access. Thickness alone cannot establish a safe span, cart rating or wheel-load capacity.
Molded panels transfer load in two directions; pultruded panels have a primary bearing-bar direction. Cutouts can interrupt load paths and may require extra supports. Seal cut edges with a compatible resin.
A 4:1 safety factor may be specified for a project, but it must be defined and verified for the exact product and failure mode. It is not a universal rating.
Get a Custom Span & Load Review| Clear span | UDL & point load | Deflection |
|---|---|---|
| 600 mm | Product-specific verification | Check project limit |
| 750 mm | Product-specific verification | Check project limit |
| 900 mm | Product-specific verification | Check project limit |
| 1000 mm | Product-specific verification | Check project limit |
Span review checklist, not a load-capacity table. Provide distributed loads in kN/m² and point or wheel loads in kN, including contact area and dynamic effects.
Opens an email draft for your load details; does not calculate a safe load.
04 / Working environments
Applications for 1 1/2" Industrial FRP Grating
Match the proposed panel to the environment, loads and supports. Discuss your project with Leihong before finalizing material selection.

Chemical & Petrochemical Platforms
Corrosion-resistant access around process equipment. Confirm solvents, acid or alkali exposure, temperature and electrical requirements.
Discuss this application →
Wastewater Plant Walkways
Lightweight access around tanks and filter areas. Review chemical gases, humidity, fixing details and open versus covered construction.
Discuss this application →
Trench Covers & Car Wash
Open mesh for drainage and access. Vehicle wheels and carts require an explicit wheel-load design; pedestrian ratings are insufficient.
Discuss this application →
Offshore & Marine Decking
Consider for salt-exposed access areas with suitable fixings. Review slip performance, UV exposure, uplift, fire and applicable marine approvals.
Discuss this application →05 / Factory fabrication
Custom Fabrication, Precision Cutting & Accessories
Send CAD drawings, panel schedules or a dimensioned sketch to discuss cut-to-size fiberglass grating. BIM requirements can be reviewed with the project documentation.
- Confirm drawings & materialPanel dimensions, load direction, support, resin, surface and RAL color.
- Produce & fabricate panelsReview shaped cuts, pipe openings and post notches against the support layout.
- Seal edges & inspectAgree edge treatment, curing checks and any required performance testing.
- Label, kit & packPanel marks, suitable 316 stainless clips and export packing; compliant timber packaging where applicable.



1 / 3 · Grating product references
06 / Buyer questions
Frequently Asked Questions About 1-1/2" FRP Grating
Why choose 1 1/2 inch (38mm) FRP grating for industrial walkways?
This depth is commonly considered because it balances panel weight and structural depth. A 750–900mm support spacing is a design input to check, not an automatic safe-span approval. Use the exact product load table and project deflection limit.
Ask our technical team →How does 1 1/2 FRP grating compare with galvanized steel?
FRP does not undergo steel rusting and can offer lighter handling and suitable corrosion resistance. Weight savings, stiffness and maintenance costs depend on the panels compared. FRP still needs inspection, and resin compatibility must be checked.
Ask our technical team →How do I cut and install 38mm fiberglass grating?
Follow the supplier’s fabrication instructions. Suitable diamond or carbide tooling may be used with dust extraction and appropriate protective equipment. Seal exposed cut edges with compatible resin and verify supports, cutouts, bearing and clip positions.
Ask our technical team →Can Leihong supply ASTM E84 Class 1 grating?
Specify the required flame-spread and smoke-developed criteria with your inquiry. Request a valid ASTM E84 test report covering the proposed formulation and product. Class 1/Class A commonly involves a flame-spread index of 25 or less; E84 alone does not establish all building-code or fire-resistance requirements.
Ask our technical team →Are molded and pultruded 1.5 inch grating interchangeable?
No. Molded and pultruded panels differ in mesh, reinforcement and load direction. The 38 × 38mm square-mesh reference on this page describes molded grating. Confirm a separate specification and load table for pultruded construction.
Ask our technical team →Can I request samples and international shipping?
Yes, include the requested resin, color, finish, quantity and destination. Sample availability, charges or freight, dispatch timing, production lead time and export packing will be confirmed with the quotation.
Ask our technical team →07 / Factory-direct inquiry
Ready to Order 1 1/2" FRP Grating for Your Next Project?
Discuss standard panel wholesale orders or custom fabrication with Hebei Leihong FRP Technology Co., Ltd. Send your specifications for a quotation, sample options and product-specific load documentation.
- Panel sizes, total area or number of panels
- IFR / VFR resin, color and surface finish
- Clear spans, load details and cutout drawings
- Delivery country, postcode and required date
sales@leihongfiberglass.com
WhatsApp: +86 18831837530
Certification scope, sample costs, dispatch dates and response timing are confirmed for each inquiry.
Get Factory-Direct Pricing & Sample Options
Please include quantity, resin and span details in the message field.
Prefer to send drawings? Email our sales team →
Your contact details help our team respond to your project inquiry.
Visit the contact page →