Custom FRP Scrubber Towers for Odor, Fume and Corrosive Gas Treatment
Hebei Leihong FRP Technology Co., Ltd. manufactures customized fiberglass reinforced plastic scrubber towers for wastewater odor control, chemical exhaust treatment, industrial gas purification and corrosive air-handling systems.
FRP Scrubber Towers Built for Corrosive Exhaust Environments
Corrosion-Resistant Scrubber Systems for Odor and Exhaust Gas Treatment
FRP scrubber towers remove or reduce odors, acidic gases, alkaline gases, chemical fumes and other soluble contaminants from industrial exhaust streams.
Fiberglass reinforced plastic is widely used for scrubber equipment because it provides corrosion resistance, low maintenance, lightweight construction and flexible custom fabrication.
We manufacture vertical, horizontal, packed-bed, spray and multi-stage scrubber towers according to airflow, gas composition, removal target, pressure drop and installation requirements.
Custom FRP Scrubber Configurations for Different Gas Treatment Processes
Scrubber configuration should match gas composition, airflow, required removal efficiency, installation space and available circulation system.
Packed-Bed Scrubber
Gas passes through packing media while liquid is distributed from the top for efficient gas-liquid contact.
- High contact efficiency
- Common for odor and acid-gas treatment
- Custom packing height
Spray Scrubber
Spray nozzles distribute liquid directly into the gas stream for cooling, washing and contaminant removal.
- Simple internal structure
- Suitable for high dust loading
- Lower risk of packing blockage
Vertical Scrubber Tower
Space-saving vertical configuration for wastewater, chemical and industrial exhaust systems.
- Compact footprint
- Flexible internal stages
- Suitable for outdoor installation
Horizontal Scrubber
Horizontal gas-treatment equipment for sites with height restrictions or specific duct layouts.
- Low installation height
- Easy access to internal sections
- Custom chamber arrangement
Multi-Stage Scrubber
Multiple treatment stages for complex gas mixtures or higher removal requirements.
- Separate chemical stages
- Improved treatment control
- Suitable for mixed contaminants
Integrated Scrubber System
Scrubber tower combined with circulation tank, piping, pump connections, platform and accessories.
- Integrated project supply
- Reduced site fabrication
- Custom equipment layout
Gas-Liquid Contact for Odor and Contaminant Removal
Contaminated gas enters the scrubber and contacts the circulating liquid through spray nozzles, packing media or multiple treatment stages.
Gas Inlet
Contaminated exhaust enters through a custom inlet connection.
Liquid Distribution
Spray nozzles distribute water or chemical solution.
Gas-Liquid Contact
Contaminants transfer from the gas phase into the liquid phase.
Mist Elimination
Droplets are removed before treated gas leaves the tower.
Liquid Collection
Used liquid returns to the circulation tank or drain system.
Clean Gas Outlet
Treated gas exits through the outlet duct or fan connection.
FRP Scrubber Towers for Environmental and Industrial Projects
Wastewater Treatment Plants
Odor treatment for pumping stations, tanks, sludge areas and sewage facilities.
Chemical Processing
Treatment of acidic, alkaline and corrosive process gases.
Electroplating Facilities
Removal of acid mist and chemical fumes from production lines.
Mining Operations
Gas, odor and dust treatment in mineral-processing facilities.
Food Processing
Odor treatment for wastewater, fermentation and production areas.
Laboratories
Corrosive exhaust treatment from fume hoods and chemical rooms.
Waste Treatment
Odor and gas treatment in waste-transfer and disposal facilities.
Industrial Exhaust
Custom air-pollution control for corrosive and soluble gas streams.
Scrubber Towers Manufactured Around Your Process Requirements
Tower Diameter
Selected according to airflow and gas velocity.
Tower Height
Based on packing height, stages and treatment requirements.
Resin System
Orthophthalic, isophthalic, vinyl ester or flame-retardant.
Inlet and Outlet
Custom duct diameter, orientation and flange dimensions.
Internal Structure
Packing supports, spray headers, mist eliminators and distributors.
Access Openings
Manholes, inspection ports, removable covers and maintenance doors.
Support Structure
Base frame, legs, platforms, ladders and lifting lugs.
Integrated Accessories
Tank, piping, pump connections, drains and instrument interfaces.
Available Options for Custom FRP Scrubber Towers
Final specifications depend on airflow, gas composition, temperature, pressure, treatment target and installation conditions.
| Material | Fiberglass Reinforced Plastic |
|---|---|
| Configuration | Vertical, Horizontal, Packed-Bed, Spray, Multi-Stage |
| Resin | Orthophthalic, Isophthalic, Vinyl Ester, Flame-Retardant |
| Airflow | According to Project Process Requirements |
| Diameter | Custom According to Airflow and Gas Velocity |
| Height | Custom According to Packing and Treatment Stages |
| Internal Components | Packing, Nozzles, Supports, Mist Eliminator, Distributor |
| Connections | Inlet, Outlet, Drain, Overflow, Pump and Instrument Interfaces |
| Accessories | Ladders, Platforms, Supports, Lifting Lugs and Access Ports |
Resin Systems for Corrosive Gas Treatment Environments
Resin selection affects chemical resistance, temperature performance and service life.
Orthophthalic Polyester
General-purpose applications with moderate corrosion exposure.
Isophthalic Polyester
Improved corrosion resistance for wastewater and industrial gases.
Vinyl Ester
Higher resistance for aggressive acid, alkali and chemical environments.
Flame-Retardant Resin
For projects requiring improved flame-spread performance.
UV-Resistant Surface
Suitable for outdoor towers exposed to sunlight and weather.
Custom Laminate
Thickness and reinforcement selected according to pressure and structure.
Internal Arrangement Should Match the Gas Treatment Process
Important Factors Before Scrubber Manufacturing
Tower design should consider airflow, gas velocity, contact time, pressure drop, chemical solution, maintenance access and structural loads.
From Process Review to Finished FRP Scrubber Tower
Process Data Review
Confirm airflow, gas type, temperature and removal target.
Drawing Confirmation
Review dimensions, connections, internals and supports.
Material Selection
Select resin, laminate thickness and reinforcement.
Mold and Shell Production
Manufacture tower sections according to approved drawings.
Internal Installation
Install supports, spray systems and mist eliminators.
Connection Fabrication
Add flanges, nozzles, drains and access openings.
Trial Assembly
Check fit, dimensions and modular connections.
Inspection and Packing
Complete final inspection and export packaging.
Inspection Focused on Dimensions, Structure and Connection Accuracy
Customized scrubber towers must match the approved process layout and site connection requirements.
Customer drawings, checklists and tolerance requirements can be confirmed before production.
Typical FRP Scrubber Tower Projects
Odor-Control Scrubber System
Custom packed-bed tower for sewage odor collection and treatment.
Corrosive Gas Treatment Tower
Vinyl ester scrubber for acidic and chemically aggressive exhaust.
Acid Mist Scrubber System
Integrated scrubber with duct connections, platform and circulation tank.
What We Need to Quote Your FRP Scrubber Tower
Complete process information helps us evaluate tower size, material, internal structure and manufacturing method.
Common Questions About Custom FRP Scrubber Towers
Contact us if your project requires special gas treatment, multiple chemical stages or integrated equipment.
Yes. We can manufacture according to process drawings, equipment layouts, CAD files and confirmed specifications.
Airflow, gas composition, concentration, temperature, required removal efficiency and pressure-drop limits are important.
Vinyl ester is commonly selected for aggressive chemical environments, but final selection depends on the specific chemical and temperature.
Yes. Packing supports, spray headers, nozzles, mist eliminators and internal distributors can be included.
Yes. Large towers can be divided into modular sections for container loading and on-site assembly.
Yes. FRP or steel platforms, ladders, railings and support frames can be included when required.
Send Us Your FRP Scrubber Tower Requirements
Provide airflow, gas type, concentration, temperature, removal target and installation information. WhatsApp will open after submission.
Request Project Review
Send Us Your Process Data for a Manufacturing Review
We can review airflow, gas composition, tower structure, resin system and connection requirements.